Windows 10’s Fast Startup mode is a great way to speed up your computer, but there are some cons to be aware of. Fast Startup mode saves your computer’s state when you last used it, so it starts up quickly the next time you use it. However, if you have a lot of programs open at the same time, Fast Startup can slow down your computer. If you want to disable Fast Startup mode, go to Settings > System > Advanced startup and select “Disable fast startup.” ..
Windows 10’s Fast Startup (called Fast Boot in Windows 8) works similarly to the hybrid sleep mode of previous versions of Windows. By saving the operating system state to a hibernation file, it can make your computer boot up even faster, saving valuable seconds every time you turn your machine on.
Fast Startup is enabled by default in a clean Windows installation on most laptops and some desktops, but it doesn’t always work perfectly, and there are some downsides that might convince you to turn it off. Here’s what you need to know.
How Fast Startup Works
Fast Startup combines elements of a cold shutdown and the hibernate feature. When you shut down your computer with Fast Startup enabled, Windows closes all applications and logs off all users, just as in a normal cold shutdown. At this point, Windows is in a state very similar to when it’s freshly booted up: No users have logged in and started programs, but the Windows kernel is loaded and the system session is running. Windows then alerts device drivers that support it to prepare for hibernation, saves the current system state to the hibernation file, and turns off the computer.
When you start the computer again, Windows does not have to reload the kernel, drivers, and system state individually. Instead, it just refreshes your RAM with the loaded image from the hibernation file and delivers you to the login screen. This technique can shave considerable time off your start up.
RELATED: What’s the Difference Between Sleep and Hibernate in Windows?
This is different from the regular hibernate feature. When you put your computer into hibernation mode, it also saves open folders and applications, as well as currently logged in users. Hibernation is great if you want to return your computer to the exact state it was in when you turned it off. Fast Startup offers a freshly-started Windows, just more quickly. And don’t forget, Windows offers various shutdown options too. It pays to understand how they differ.
Why You Might Want to Disable Fast Startup
Sounds awesome, right? Well, it is. But Fast Startup also has its problems, so you should take the following caveats into consideration before enabling it:
When Fast Startup is enabled, your computer doesn’t perform a regular shut down. Since applying new system updates often requires a shutdown, you may not be able to apply updates and turn your computer off. Restart is unaffected, though, so it still performs a full cold shutdown and restart of your system. If a shutdown doesn’t apply your updates, a restart still will. Fast Startup can interfere slightly with encrypted disk images. Users of encryption programs like TrueCrypt have reported that encrypted drives they had mounted before shutting down their system were automatically remounted when starting back up. The solution for this is just to manually dismount your encrypted drives before shutting down, but it is something to be aware of. (This doesn’t affect the full disk encryption feature of TrueCrypt, just disk images. And BitLocker users shouldn’t be affected. ) Systems that don’t support hibernation won’t support Fast Startup either. Some devices just don’t play well with hibernation. You’ll have to experiment with it to see whether your devices respond well or not. When you shut down a computer with Fast Startup enabled, Windows locks down the Windows hard disk. You won’t be able to access it from other operating systems if you have your computer configured to dual-boot. Even worse, if you boot into another OS and then access or change anything on the hard disk (or partition) that the hibernating Windows installation uses, it can cause corruption. If you’re dual booting, it’s best not to use Fast Startup or Hibernation at all. Depending on your system, you may not be able to access BIOS/UEFI settings when you shut down a computer with Fast Startup enabled. When a computer hibernates, it does not enter a fully powered down mode. Some versions of BIOS/UEFI work with a system in hibernation and some do not. If yours doesn’t, you can always restart the computer to access BIOS, since the restart cycle will still perform a full shutdown.
RELATED: How to Make Your Windows 10 PC Boot Faster
If none of these issues apply to you, or you can live with them, go ahead and try Fast Startup out. If it doesn’t work how you expect, it’s easy to turn off. And if you decide you just don’t want to use Fast Startup, there are plenty of other ways to make your Windows 10 PC boot faster.
How to Enable or Disable Fast Startup
Deciding whether to bother with Fast Startup actually takes longer than turning it on or off. First, open up your power options by hitting Windows+X or right-clicking your Start menu and selecting Power Options. In the Power Options window, click “Choose what the power buttons do.”
If this is the first time you’ve messed with these settings, you’ll need click “Change settings that are currently unavailable” to make the Fast Startup option available for configuration.
Scroll to the bottom of the window and you should see “Turn on fast startup (recommended),” along with other shutdown settings. Just use the check box to enable or disable Fast Startup. Save your changes and shut down your system to test it out.
If you don’t see the option at all, it means hibernation is not enabled on your machine. In this case, the only shutdown options you’ll see are Sleep and Lock. The quickest way to enable hibernation is to close the power settings window and then hit Windows+X and open Command Prompt (Admin). At the Command Prompt, type the command:
After turning hibernate on, run through the steps again and you should see both the Hibernate and Fast Startup options.
Reduce the Size of Your Hibernate File if You Only Use Fast Startup
If you don’t use the hibernate option but do use fast startup, you can reduce the size of your hibernation file, which can grow to several gigabytes in size. By default, the file takes up space equal to about 75% of your installed RAM. That may not seem bad if you’ve got a big hard drive, but if you’re working with limited space (such as an SSD), every little bit counts. Reducing the size cuts the file to around half its full size (or around 37% of your RAM). To change the size of your hibernation file (by default located at C:\hiberfile.sys), hit Windows+X and open Command Prompt (Admin).
At the Command Prompt, use this command to set a reduced size:
Or use this command to set it to full size:
And that’s it. Don’t be afraid to turn Fast Startup on and experiment with it. Just keep the caveats we mentioned in mind and see whether it works for you. You can always put things back the way you had them.
